Back

Aztech DSL700P

Install Driver in Windows 98SE
Note:

• Ensure that you have installed the Aztech DSL700P Card properly into the Computer
• Ensure that you have inserted the Aztech DSL700P Installation CD into the CD ROM
• Ensure that you have the Windows installation CD ROM

1. When you startup the system ,the Windows will detect the Aztech DSL700P Card
2. You should see the Hardware Wizard window appears as shown below
3. Click on Next > button to continue




4. Tick the option "Search for the best driver for your device. (Recommended)" and click on Next > button




5. Tick the option "Specifiy a location" and click on Browse button




6. Select the CDROM drive and then "1_Win98" folder
7. Click on OK button




8. Click on Next > button to continue




9. Click on Next > button




10. Please wait while the Windows is copying files




11. If the installation prompts for the Windows installation CD, please remove the driver CD-ROM and insert the Windows installation CD
12. Click on OK button




13. Type in the windows path and click on OK button




14. Click on Finish button




15. Click on OK button to restart the system




16. Please wait for a few minutes for the Windows to startup
17. You should see a window appears as shown below
18. Type in the IP address and the Gateway IP

(Please refer to service letter for the IP address)
19. Click on OK button the apply the changes




20. Click on OK button to restart the system




21. After the system restarts , you should see a small icon at the system taskbar




22. You are ready for surf the Internet and read your emails
23. You have successfully installed the Aztech DSL 700P driver onto the Windows 98SE