Back

Aztech DSL700P

Install Driver in Windows ME
Note:

• Ensure that you have installed the Aztech DSL700P Card properly into the Computer
• Ensure that you have inserted the Aztech DSL700P Installation CD into the CD ROM

1. When you startup the system ,the Windows will detect the Aztech DSL700P Card
2. You should see the Hardware Wizard window appears as shown below
3. Tick the option "Specify the location of the driver (Advanced) and click on Next > button




4. Tick the option "Specifiy a location" and click on Browse button




5. Select the CDROM drive and then "4_WinME" folder
6. Click on OK button




7. Click on Next > button to continue




8. Click on Next > button




9. Please wait while the Windows is copying files




10. Click on Finish button




11. Click on OK button to restart the system




12. Please wait for a few minutes for the Windows to startup
13. You should see a window appears as shown below
14. Type in the IP address and the Gateway IP

(Please refer to service letter for the IP address)
15. Click on OK button the apply the changes




16. Click on OK button to restart the system




17. After the system restarts , you should see a small icon at the system taskbar




18. You are ready for surf the Internet and read your emails
19. You have successfully installed the Aztech DSL 700P driver onto the Windows ME