Back

Efficient SpeedStream 3060

Install Driver
Please take note the following points :
- You must have the original Microsoft 95 / 98 / 98SE / ME CD before carry out this procedure .
- You must have the Magix Starter Kit CD with you or downloaded the driver
- You must have downloaded the driver and extracted it into temporary folder

1. When you startup the window , it will detect a new hardware
2. Click on Next > icon 


 
3. Select the "Search for the best driver for your device." option and click on Next button


 
4. Check the option "Specific a location" and click on Browse... button

( if you want to install it from the CD-ROM , check the option "CD-ROM" Drive and click on OK button )

 
5. Select the path at "C:\temp" and click on OK button

( if you want to install it from the CD-ROM , please ignore this and next step )

 
6. Click on Next > button


 
7. Window will detect the driver and click on Next > button


 
8. Please wait while the Windows start to copy files into the harddisk


 
9. If you are prompt for "profile", select the "60CIP" profile and click on OK button

( if you never see it , please continue the steps from below )

 
10. Click on Next > button to continue


 
11. Leave the setting as default and click on Next > button


 
12. Click on Add button

( if you never prompt for "Virtual Ciircuits" settings , please proceed to step 19 )

 
13. Type in VCI value as "100" and click on OK button


 
14. Repeat from step 11 to step 12 to add another VCI value
15. Click on Add button


 
16. Type in VCI value as "101" and click on OK button


 
17. You will see the values are added into the PVC List
18. Click on Next > button to proceed


 
19. Click on Finish button


 
20. Please wait while the Windows start to copy files into the harddisk


 
21. Click on Finish button to end the installation


 
22. Click on Yes button to restart computer


 
23. You have successfully installed the new Eff3060 driver.