Back

Efficient ENI25p

Configure Driver
note : The network properties for Efficient ENI25p may has different name appears as follows :
.Efficient ENI-25p ATM Adapter (01) 802.3 LANE Client
.Efficient ENI-25p ATM Adapter (00) RFC 1577 Classical IP PVC Client

1. From the Windows Desktop , double click on My Computer icon > Control Panel icon > Network icon
2. Select the "Efficient ENI-25p ATM Adapter (01) 802.3 LANE Client" at the network component

and click on Properties button

 
3. Click on the Client Type tab
4. From the Client Type tab , select "Classical IP" and click on Configure... button


 
5. You will see a window appears as shown below
   
   
   
6. From the CIP Client tab , configure the following settings :

Default Transmit Rate = 0.30 Mbps ( tip : use arrow key from keyboard to set the value )
Add/Remove PVCs = 0.30 Mbps ( tip : use arrow key from keyboard to set the value )

From the VCI option , type in 100 and 101 and click on Add -> button
Configured PVCs

VPI	VCI	Rate(Mbps)
0	100	0.30
0	101	0.30


 

7. Click on Rate Table tab
8. Configure the following settings :

Transmit Rate = 0.30 Mbps ( tip : use arrow key from keyboard to set the value )

From the IP Address option , type in the 2 Rate table IP address and click on >> button
please refer the 2 IP address to the Rate Table given in the manual
* do not follow the below Rate Table IP address settings as different IP address has its own values

 

9. Next is click on the Adapter tab
10. Set the UNI Version to "UNI 3.0"


 
11. Click on OK button to end the configuration
12. You have successfully configured driver.