Back

Virata VL 1025

Check Driver Configuration

1. From the Windows Desktop , double click on My Computer icon > Control Panel icon > Network icon
2. Select the "ATML VIRATAlink VL1025/VL2025" at the network component

and click on Properties button

 
3. Click on ATM tab
4. Click on Configure... button


 
5. Ensure the following settings :

Classical IP is selected
Signalling : UNI 3.0 is selected

 
6. Click on Classical IP Settings... button
7. From the PVC Classical IP , ensure that



VC Identifier	Transmit Rate (Mbps)
100	0.3
101	0.3


 
8. Click on OK button to go back to ATM Protocol Configuration


 
9. Click on Advanced button
10. Ensure the following settings :

Port Speed : other is selected and set to 300 kbps
ILMI is enabled

 
11. Click on the OK button 4 times to quit
12. You have successfully checked the driver configuration