Back

DSL Turbo 900 Package

Check Modem LEDs

3 types of LED status need to take note as follows :

1. Power LED (PWR) - always ON
   
   
   If your Power LED does not light up , please check that the Mains Supply is powered on and the Power switch on the modem is at "I" position .
   If it still does not light up , please refer to the Aztech Dealers (from where you bought it) for the support. 
   
   
2. Ethernet Link LED (LINK) - always ON
   
   
   If your Ethernet Link LED does not light up , please check that the RJ-45 cable is connected properly from the Ethernet Card to the Modem.
   If it still does not light up , please refer to the Aztech Dealers (from where you bought it) for the support. 
   
   
3. ADSL Status LED (LINK) - always ON
   
   
   If your ADSL Status LED does not light up , please check that the Mains Supply is powered on and the Power switch on the modem is at "I" position . If it still does not light up , please refer to the Aztech Dealers (from where you bought it) for the support.
   
   If your ADSL Status LED never stop blinks , please check that the ADSL line (RJ-11) is connected properly to the modem from the Wall Socket . If it still the same problem , please refer to the Magix Technical Helpdesk for the support.