|
|
|||||||||||||
|
|||||||||||||
| Configure SpeedTouch Setup |
| We recommend to connect a Ethernet cable from the SpeedTouch 570 to the computer or ensure that you have associated the wireless card to the SpeedTouch 570. |
| 1. From the window desktop, click on the 'SpeedTouch 0314EGOEP'
icon to open SpeedTouch Setup (Alternately, you can go to the SpeedTouch setup by open the browser configured without proxy settings to the following URLs : o http://speedtouch.lan/ o http://10.0.0.138/ o http://192.168.1.1/ )  |
| 2. To see the System Information, 1. Click on System information link at the Basic 2. You should see the Diagnostics information |
3. Click on the Service Info tab  |
| 4. You should see the Service information like IP address and DNS |
5. Click on the Configuration tab  |
| 6. You should see the Configuration information |
7. Click on the System tab  |
8. You should see the System information  |
| 3. To configure the Connections, 0. Click on Connections link at the Basic |
1. Type in the User (userid@singnet format ) and password  |
| 2. Click on Connect link to connect to the Internet |
3. If state shows 'connected ', it means you have successfully
connected to the Internet  |
 |
|
|
 |
||
 |
 |
