Important Note :
Before you proceed with the setup, please ensure that you have the original version of Windows 2000 installation CD-ROM with you.

1. From the Windows Desktop, double click on My Computer icon


          


2. My Computer window opens. Double-click on the Control Panel icon





3. Control Panel window opens. Double click on the Network and Dial-up Connections icon



4. Network and Dial-up Connections window opens. Double click on the SingNet icon





5. The Connect SingNet window opens. Click on the Properties button





6. Click on the General tab. Ensure the following settings are set correctly:
• Connect using : Modem/Modem driver that you have installed is selected
• Phone number : Please enter your assigned SingNet account dial-up number. Please refer to your Account Slip or SingNet JumpStart kit CD jacket. You can also get the information from SingNet System Configuration 
• Do not check "use dialing rules" option
• Click on the option box Show icon in taskbar when connected


7. Click on the Options tab
   
   
   
   
8. Ensure that the following Dialing option boxes are ticked
• Display progress while connecting
• Prompt for name and password, certificate, etc


9. Click on Security tab





10. Ensure that the following Security option box is selected.
• Typical (Recommended settings)


11. Click on Networking tab
    
    
    
    
12. Ensure that the following Networking settings are set
• Type of dial-up server I am calling: PPP: Windows 95/98/NT4/2000 , Internet
• Components checked are used by this connection:

   Internet Protocol (TCP/IP)
   (Please see the graphics below for reference)


13. Highlight Internet Protocol (TCP/IP) and click on Properties button





14. Internet Protocol (TCP/IP) Properties window opens. Configure the following settings :
• Click on the option box Obtain an IP address automatically
• Click on the option box Use the following DNS server addresses
Prefered DNS server:   165.21.83.88
Alternate DNS server:  165.21.100.88
• Click on the Advanced... button





• Click on the General tab and ensure that the following option box is ticked:
  • Use default gateway on remote network
  
  
  
  
• Click on DNS tab





• Leave the settings as default and click on WINS tab





• Leave the settings as default and click on Options tab





• Leave the settings as default and click on OK button





• Click on OK button





15. Click on Sharing tab





16. Leave the settings as default and click on OK button to end





17. Click on Dial button if you want to connect to SingNet





SingNet Dial-Up Connection and Network Properties Configuration for Windows 2000 completed