Compaq WL110 : Configuration of Wireless Connection Profile (Win 98SE/ME/2000)

Before you start, please ensure that you have completely installed the Compaq WL110 driver and Client Manager Utility. Below shows the steps on how to add a new profile if you do not have any and how to edit the existing profile if it is not working in the Windows 98SE/ME/2000 operating system.

To add a new Profile

1. Open the Client Manager by click on Start > Programs > Compaq WL110 > Client Manager
2. Click on Actions and then Add/Edit configuration profile




3. Click on Add button




4. From the Profile Name , type in "Outdoor Wireless Surf"
5. Select Access Point under the Network Type and click on Next > button




6. Type in singtel under the Network Name and click on Next > button




7. Uncheck the Enable Data Security option and click on Next > button




8. Select the option Off and click on Next > button




9. Tick the option Renew IP Address when selecting this profile and click on Finish button




10. At the Windows taskbar, you will be able to see the Wireless Signal Indication bar




11. You should be able to see the connection details in the Client Manager




12. You've successfully added a new profile

To edit an existing Profile

1. Open the Client Manager by click on Start > Programs > Wireless > Client Manager
2. Click on Actions and then Add/Edit configuration profile




3. Select "Outdoor Wireless Surf" option and click on Edit button




4. Select Access Point under the Network Type and click on Next > button




5. Type in singtel under the Network Name and click on Next > button




6. Uncheck the Enable Data Security option and click on Next > button




7. Select the option Off and click on Next > button




8. Tick the option Renew IP Address when selecting this profile and click on Finish button




9. You've successfully edited an existing profile